Lesson 7: Electrical Power and Energy
What electrical power and energy are, how to use P = V × I, and the difference between watts and watt-hours, with car and household examples and exercises.
Builds on Lesson 6: Understanding Parallel Circuits
In this lesson you’ll learn
- What electrical power means
- Watts and what they represent
- Calculating power, voltage and current with P = V × I
- How power relates to resistance
- The difference between watts and watt-hours
- Energy use of real devices
Lesson summary
- Power is the rate at which energy is transferred. 1 watt (W) = 1 joule per second.
- P = V × I. Rearranged: I = P ÷ V and V = P ÷ I.
- Combined with Ohm’s law: P = I² × R and P = V² ÷ R. Doubling the voltage on the same resistance gives four times the power.
- Energy = power × time. Watt-hours (Wh) and kilowatt-hours (kWh) measure energy; watts measure power.
- At the same voltage, a more powerful device draws more current, so it needs thicker wiring and a bigger fuse.
- Battery energy (Wh) ≈ voltage × amp-hours. Run time ≈ energy ÷ power, in theory.
Lesson notes: Electrical Power and Energy
A written version of this lesson. The hands-on simulators are in the lesson itself.
Power is how fast energy is transferred
A battery gives energy to the charge; a lamp turns that energy into light and heat. Power is how fast that happens, measured in watts (W).
P = V × I Power (W) = voltage (V) × current (A).
Change the voltage and the resistance and watch the power.
Key idea: 1 watt = 1 joule of energy transferred every second. Voltage is energy per charge; current is charge per second; so V × I is energy per second.
A power calculator
Like Ohm’s law, P = V × I can be rearranged. Choose what to find and enter the other two.
Key idea: P = V × I, I = P ÷ V, V = P ÷ I. Use the same triangle trick: P on top, V × I below.
Power and resistance
Combine P = V × I with Ohm’s law (I = V ÷ R) and you get two more useful forms:
P = V² ÷ R P = I² × R
Here the resistance is fixed at 12 Ω. Slide from 12 V to 24 V: double the voltage, and the power goes up four times.
Key idea: Doubling the voltage doubles the current, and P = V × I, so the power goes up 2 × 2 = 4 times. That’s why the wrong supply voltage can quickly burn out a component.
Watts and watt-hours are different
Watts are a rate: how fast energy is used. Watt-hours are an amount: how much energy has been used in total.
Energy (Wh) = power (W) × time (h) 1 kWh = 1000 Wh, the “unit” on an electricity bill.
Pick a device and a time.
Key idea: A 2000 W kettle used for 6 minutes uses the same energy (200 Wh) as a 10 W phone charger running for 20 hours.
Worked examples
A 12 V circuit carries 2 A. How much power is being used?
P = V × IP = 12 V × 2 AP = 24 W
A 12 V car headlight bulb is rated at 55 W. What current does it draw?
I = P ÷ VI = 55 W ÷ 12 VI ≈ 4.58 A
A device uses 60 W and draws 5 A. What voltage is it running on?
V = P ÷ IV = 60 W ÷ 5 AV = 12 V
A car interior light draws 0.5 A from 12 V. What is its power?
P = V × IP = 12 V × 0.5 AP = 6 W
A 4 Ω heater element is connected to 12 V. What is its power?
P = V² ÷ RP = 12² ÷ 4 = 144 ÷ 4P = 36 W(Or: I = 12 ÷ 4 = 3 A, then P = 12 × 3 = 36 W)
3 A flows through a 2 Ω resistor. How much power does it turn into heat?
P = I² × RP = 3² × 2 = 9 × 2P = 18 W
A 55 W headlight is left on for 2 hours. How much energy does it use?
Energy = P × tEnergy = 55 W × 2 hEnergy = 110 Wh
A 2000 W kettle runs for 6 minutes (0.1 hours). How many watt-hours does it use?
Convert time: 6 minutes = 0.1 hEnergy = 2000 W × 0.1 hEnergy = 200 Wh (0.2 kWh)
A 12 V car battery is rated at 60 amp-hours (Ah). Roughly how much energy does it store, in watt-hours?
Energy ≈ V × AhEnergy ≈ 12 V × 60 AhEnergy ≈ 720 Wh
In theory, how many hours could that 720 Wh battery run both 55 W headlights (110 W together)?
Time = energy ÷ powerTime = 720 Wh ÷ 110 WTime ≈ 6.5 hours (in practice much less: a starter battery shouldn’t be fully drained)
No experience needed. Answer as you go; you can always try again.