Series & Parallel CircuitsLesson 6: Understanding Parallel Circuits
Module 3: Series and Parallel Circuits

Lesson 6: Understanding Parallel Circuits

How parallel circuits work: the same voltage on every branch, currents that add up, equivalent resistance, and why cars and buildings are wired in parallel.

  • About 25 minutes
  • 8 questions
  • 1 hands-on activity

Builds on Lesson 5: Understanding Series Circuits

In this lesson you’ll learn

  • What a parallel circuit is
  • Why every branch gets the same voltage
  • How current divides between branches
  • Equivalent resistance of parallel branches
  • What happens when one branch disconnects
  • Why vehicles and buildings use parallel wiring
Lesson summary
  • In a parallel circuit each component has its own branch, connected directly across the supply.
  • Every branch has the full supply voltage across it.
  • Each branch current is I = V ÷ R for that branch. Lower resistance branches carry more current.
  • The total current is the sum of the branch currents.
  • Equivalent resistance: 1/R = 1/R₁ + 1/R₂ + 1/R₃. It is always less than the smallest branch resistance.
  • If one branch opens, the others keep working, but the total current from the supply falls.

Lesson notes: Understanding Parallel Circuits

A written version of this lesson. The hands-on simulators are in the lesson itself.

Each load gets its own path

In a parallel circuit, each component sits on its own branch, connected between the same two points: the + side and the − side of the supply.

Turn branches on and off with their switches. Watch the other bulbs, and the current near the battery.

Key idea: Each branch is its own complete loop through the battery, so each can be switched on its own.

Every branch gets the full voltage

Each branch is joined directly to the + rail and the − rail. So the voltage across every branch is the same as the supply: 12 V.

Change a bulb’s resistance and look at the Voltage column. It doesn’t move.

Key idea: Parallel: same voltage on every branch. (Series: same current through every component.)

Current divides, then adds back up

Current leaves the battery, splits at the junctions, flows through the branches, and joins again on the way back.

Example: 12 V across branches of 12 Ω, 6 Ω and 4 Ω.
  1. Branch currents: 12 ÷ 12 = 1 A, 12 ÷ 6 = 2 A, 12 ÷ 4 = 3 A
  2. Total current: 1 + 2 + 3 = 6 A

The lowest resistance branch carries the most current.

Key idea: Total current = I₁ + I₂ + I₃. Each branch current is the supply voltage ÷ that branch’s resistance.

Equivalent resistance

Adding a branch gives the current another path, so the circuit as a whole has less resistance.

1/R = 1/R₁ + 1/R₂ + 1/R₃

Example: 12 Ω, 6 Ω and 4 Ω in parallel.
  1. 1/R = 1/12 + 1/6 + 1/4 = 1/12 + 2/12 + 3/12 = 6/12
  2. R = 12 ÷ 6 = 2 Ω
  3. Check: 12 V ÷ 2 Ω = 6 A, the same total current as before ✓

Shortcut for two branches: R = (R₁ × R₂) ÷ (R₁ + R₂). Two equal resistors in parallel give half of one.

Key idea: The equivalent resistance of parallel branches is always less than the smallest branch resistance.

Series and parallel compared

The same two bulbs and battery, connected two ways. Compare the numbers, then remove a bulb from both.

Key idea: Series: one path, current the same, voltage shared. Parallel: separate paths, voltage the same, current shared.

Why vehicles and buildings use parallel wiring

  • Every load gets the full voltage. A car’s headlights, wipers and radio are all designed for about 12 V, and each receives it.
  • Each load can be switched on its own, with its switch in series with that load only.
  • One failure doesn’t stop the rest. If one headlight bulb fails, the other stays on.
  • In homes, lights and sockets are connected in parallel across the mains supply for the same reasons.

Key idea: Each extra load in parallel adds to the total current. That is why supply wiring and fuses must be rated for the total current of everything they feed.

Worked examples

  1. A 12 V supply feeds a 3 Ω branch. What current flows in that branch?

    Each branch has the full supply voltage: 12 VI = V ÷ R = 12 V ÷ 3 ΩI = 4 A

  2. Three branches carry 0.5 A, 1.5 A and 2 A. What current leaves the battery?

    I(total) = I₁ + I₂ + I₃I(total) = 0.5 A + 1.5 A + 2 AI(total) = 4 A

  3. Two 12 Ω bulbs are connected in parallel. What is their equivalent resistance?

    R = (R₁ × R₂) ÷ (R₁ + R₂)R = (12 × 12) ÷ (12 + 12) = 144 ÷ 24R = 6 Ω

  4. A 4 Ω resistor and a 12 Ω resistor are in parallel. What is the equivalent resistance?

    R = (R₁ × R₂) ÷ (R₁ + R₂)R = (4 × 12) ÷ (4 + 12) = 48 ÷ 16R = 3 Ω (less than 4 Ω ✓)

No experience needed. Answer as you go; you can always try again.